 |
||||||||
Card Making Project - Island Bridge Card
Made by Linda
The triple picture topper cards are certainly popular with out card designers. This one by Linda features the Island Bridge set of card making toppers which are now discontinued so look out for other toppers that lend themselves to the same card design. Alternatively you could use a photograph you have taken. Simply print out two of the same photos and cut one into 3 strips then cut 1cm off each of the side stroips on the inner edge and 5mm off each of the sides of the middle strip. This will allow the underneath phto to show through when the strips are placed on top.
|
||||||||
 |
To make this card you will need:
 A4 Stardream Antique Gold Card creased to A5A4 Stardream Bronze CardDie Cut Foiled Toppers County Landscapes Island BridgePhoto Glue3D Foam Pads 3mm ThickPeel offs - Fleur De Lis Corners - GoldScissors |
|||||||
Push out the main Island bridge card topper and the 3 pictures that match it cutting the retaining pieces with scissors.
Cut a piece of Stardream Bronze card to measure 1cm larger, both in height and width, than the large topper.
Using photo glue stick the Stardream Bronze card to the Antique Gold and then the large topper on top of the Stadream Bronze card.
Uswing 3D foam pads, carefully line up each of the 3 picture pieces in turn and glue in place.
Push out the Happy Birthday sentiment using scissors to cut the retaining pieces. Cut another piece of Stardream Bronze 1 cm larger, both in height and width, then the Happy Birthday Sentiment.
Glue the piece of Stardream Bronze card to the bottom centre of the creased card.
Using 3D foam pads, place the sentiment on top of the Stardream Bronze card.
Add a gold Fleur De Lis peel off corner to each corner of the creased card.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
_________________________________________________________________________
|
||||||||
 |
||||||||
