 |
||||||||
Card Making Project - Marianne Creatables Bib and Shoes Card
Made by Irene
A totally pink card for a new baby girl using a background paper from the Marianne Sweet Baby paper pack combined with Stardream Rose and Stardream Azalea cardstock using the Marianne Creatables Baby's Bib and My First Shoes.
This is a quick and easy card to make. If this is too pink for you try making it using the pink gingham paper from the same paper pack as the back ground and the bib in the floral pink paper, used for the background in this card, for the bib and tops of the shoes with Stardream Rose card for the inside for the shoes.
You need a die cutting machine to make this card.
|
||||||||
 |
To make this card you will need:
 A4 Stardream Azalea CardPiece of Stardream Rose CardPeel Offs - Birth of Baby - SilverDie Cutting Machine such as the XCut Xpress, Cuttlebug or Big ShotMarianne Creatables Baby's BibMarianne Creatables My First ShoesDouble Sided Fingerlift Tape (optional)Photo GlueScissors or Craft Knife, Cutting Mat and ruler.
|
|||||||
Take a sheet of the pink paper from the Marianne paper pack and cover the front of the card using double sided tape or photo glue. If using photo glue, then leave for a minute for the photo glue to dry.
Take both the bib and bow and some Stardream Azalea card, cut just larger than the dies, and run through your die cutting machine. Remove the bib (this is a cutting die only) then change plates or adjust the dial (depending on which machine you are using) and run the bow through the die cutting machine again to emboss.
Attach the bib, with the bow above it, to the top left of the card using photo glue. Leave to dry.
Using Stardream Azalea card, run the soles of the shoes and the star "buttons" through the die cutting machine. Using the Stardream Rose card run the tops of the shoes through the die cutting machine to cut and then, changing the plates or the dial (depending on your machine) run through gain to emboss.
If you have the Xcut Xpress machine or have the extended cutting pads for the Big Shot you should be able to run all the dies through at the same time and therefore cut and emboss in only two passes through the die cutting machine - the first to cut and the second pass to emboss.
Using photo glue build up each of the shoes and then adhere to the card positioning them as shown in the photo.
Cut a piece of the leftover Stardream Azalea card to measure 40mm x 15mm and add the Baby Girl peel offs. Glue to the top right of the card using photo glue.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
______________________________________________________________________________
|
||||||||
 |
||||||||
