 |
||||||||
Card Making Project - Duck with Single Flower White Card
Made by Madeleine
|
||||||||
 |
This is the first card in our series of four cards using the Reddy Die Cut Decoupage Cream Quakers Twin Pack 1. It uses half of the pieces of the Duck with Single Flower decoupage and costs about £1.20 to make.
This has been made as a Sorry (Belated Birthday) card but could be suitable for many occasions.
To make this card you will need:
 A4 Stardream Crystal Card creased to A5Stardream Serpentine CardStardream Kunzite CardStardream Kunzite PaperReddy Die Cut Decoupage Cream Quakers Twin Pack 1Foiled Small Sentiments Sheet in GoldPhoto Glue3D Foam Pads or Silicon GlueCross Star Ribbon Border PunchRegular Corner Rounder PunchRotary TrimmerScissors |
|||||||
Cut 2 strips of Stardream Kunzite paper, each 148mm long. Punch one side of each strip with the cross star ribbon border punch. Trim the excess so that just the cross star border remains. Glue 1 strip to the bottom and 1 strip to the top of the card using photo glue.
Cut the Stardream Aquamarine card to 112mm x 146mm then punch each corner with the regular corner rounder. Glue to the centre of the card using photo glue.
Cut the Stardream Kunzite card to102mm x 136mm then punch each corner with the regular corner rounder. Glue centrally on the Stardream Aquamarine card using photo glue.
Cut out the main picture of the Duck with Single Flower and punch each corner using the regular corner rounder.
Cut out the sentiment and, using photo glue, glue at an angle across the main picture. Trim the excess card from the sentiment with scissors. Glue the main picture centrally on the Stardream Kunzite card using photo glue and leave to dry.
Build up the decoupage using 3D foam pads and pieces 3, 4, 6, 8, and 9.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
______________________________________________________________________________
|
||||||||
 |
||||||||
