![]() |
||||||||
Card Making Project - Racing Car Shaped Card
Made by Linda
|
||||||||
![]() |
This card is made using the Grand Nestabilities Labels Four.
To make this card you will need:
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|||||||
Place the card on the largest of the Grand Nestabilities Labels Four die so that the creased edge is well within the cutting die and the other edge just overlaps the cutting die. Run through the Grand Calibur die cutting machine. Check that the card is cut all the way around but do not remove it from the die. You will may have to run it through again. If so, reverse the die (so the end you cut first last time is now going through the die cutter first).
When you cut a double thickness of card you are cutting double the weight - hence the need sometimes to run it through the die cutting machine more than once.
Grand Labels Four is one of the few Grand Nestabilities that can be used in the Big Shot if you have all the extended plates. Run it through as you would any other thin die but, as the fit is tight, make sure everything is in perfect alignment before you turn the handle.
Take the backing paper that comes with the decoupage and using the second largest die from the Grand Nestabilities Four set run it through the Grand Calibur or Big Shot.
Line the backing paper up carefully with the creased shape crard and glue in place using photo glue. Snip off the piece of the backing paper that overlaps the crease of the Gold Dust card with scissors.
Push out the decoupage pieces and build up the decoupage using 3D foam pads.
Push out the sentiment and attach it to the top left of the card using 3D foam pads.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
______________________________________________________________________________
|
||||||||
![]() |