![]() |
||||||||
Card Making Project - Lace Effect Edged Locket Card
Made by Mary
|
||||||||
![]() |
The antique lace edge is created using the Woodware Crafty Edger. The locket closes with a simple overlap of the 2 side pieces.
To make this card you will need:
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|||||||
Cut a piece of Stardream Coral paper to 210mm long. Using the Woodware Crafty Edge and Antique Floral Cassette go down both sides of the coral paper. Glue centrally to the front of the card using the tape runner.
Cut the Stardream Copper card to measure 47mm x 210mm. Make a small hole at the top of the Stardream copper card. Push out the die cut locket and close it by overlapping the 2 side pieces. Thread the gold rope ribbon through the top of the locket and then through the hole at the top of the Stardream Copper card strip and knot the rope ribbon at the back of the card. Hold in place with double sided tape. Attach the copper card down the centre of the card using 3D foam tape.
Push out the 2 small toppers. Attach the 2 small toppers to the copper centre card using the tape runner. Glue the locket threaded through the Stardream Copper card in place using the tape runner.
Using the cream ribbon make a bow and glue over the hole made in the Stardream Copper card strip using a mini glue dot.
Finally, add a gold peel off to the outside of the locket. A Sister peel off was used for this card but this can be varied depending on whom the card is intended.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
______________________________________________________________________________
|
||||||||
![]() |