![]() |
||||||||
Card Making Project - Amethyst Butterfly Card
Made by Irene
This is a simple card to make but does require a die cutting machine. Irene has used a pretty backing card and toning die cut images to make this delightful card.
|
||||||||
![]() |
To make this card you will need:
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|||||||
Using double sided tape cover the front of the card with a piece of the background card cut to 198mm x 198mm. To make it fit neatly and keep the pattern even at each side, trim 5mm off each side of the background card.
Using the Sizzix Framlelits die run a piece of amethyst card through the die cutting machine and using photo glue attach the frame towards to the centre bottom of the card.
Using the Marianne Butterfly die run another piece of amethyst card through the die cutting machine. Do not remove the card from the dies. Run through the die cutting machine again using the pink embossing plate and tan mat if using the Grand Calibur or the Kars cut and emboss mat and Sizzix texture pad if using the Cuttlebug or Big Shot. Attach the completed die to the centre of the frame using 3mm foam pads.
Using one of the Spellbinders Fancy Tag Two dies run a piece of amethyst card through the die cutting machine then, without removing the card from the die, run it through again to emboss. Attach this to the top centre of the card using photo glue. Complete by adding peel off sentiments to the centre of the tag.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
______________________________________________________________________________
|
||||||||
![]() |