 |
||||||||
Card Making Project - Silver Daisies on Amethyst
Made by Irene
Combining different Spellbinders dies creates this card in silver and amethyst on a daisies background.
You will need a die cutting machine to make this card.
|
||||||||
 |
To make this card you will need:
 198mm x 198mm Creased White Card BlankDocrafts Country Companions A4 Double Sided Paper Pack - Sunshine MeadowsStardream Amethyst CardMatt Silver CardSpellbinders Nestabilities Majestic Elements Marvellous SquaresSpellbinders Nestabilities Decorative Labels EightSpellbinders Shapeabilities Jewel Flowers and FlourishesSpellbinders Shapeabilities Asian AccentsDie Cutting Machine - Cuttlebug, Big Shot or Grand CaliburPhoto Glue or Double Sided TapeSilicon Glue or 3D Foam Pads 1mm Thick |
|||||||
Using double sided tape or photo glue cover the front of the card with a piece of the background paper from the Spring Meadows paper pack cut to 198mm x 198mm.This card uses the white paper with the tiny daisies on it.
Run the following dies through the die cutting machine using the plates appropriate for your machine to cut them. Change the plates to those you need for embossing thin dies and run them through again to emboss them.
Using Stardream Amethyst card:
The border from Asian accents
The second square from Marvellous Squares (cut two of these)
The fourth square from Marvellous Squares
The third label from Decorative Labels 8
Using the matt silver card:
The largest flowers from the Jewel Flowers and Flourishes (cut two of these)
The fourth square from Marvellous Squares (cut two of these)
Using either photo glue attach the Asian accents border to the left hand side of the card.
Using either photo glue or double sided tape attach the two same size amethyst squares to the centre of the card to form two overlapping diamonds, and using either silicon glue or foam pads attach the amethyst decorative label to the centre of the card to cover the overlap.
Attach the two matt silver flowers to the centre of the label, with the smaller of the two dies at the bottom and each one offset slightly to give a 3D effect
Push out the corners from the amethyst and matt silver fourth square cut from Marvellous Squares and add the amethyst corners to the top right and bottom right of the card. Attach three of the matt silver corners to the appropriate corners of the amethyst diamonds.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
______________________________________________________________________________
|
||||||||
 |
||||||||
