 |
||||||||
Card Making Project - Easter Rabbit and Chick Card
Made by Dianne
|
||||||||
 |
Stardream Mars and Gold are used with the Easter bunny and chick for a bright and cheerful card.
To make this card you will need:
 A4 Stardream Gold CardPiece of Stardream Jupiter Red CardEaster Rabbit Decoupage SheetFine Borders & Fancy Corner Peel OffsEaziScore ScoreboardRed Permanent Maker PenDouble-sided tape or Photo Glue3D pads or Silicone GlueCraft Knife, Cutting Mat, Pencil, and Ruler |
|||||||
Using the EaziScore crease the A4 gold card to A5.
With a pencil and ruler, measure and mark out an aperture in the centre to measure 80mm wide and 135mm long. Cut out along the marked lines using a craft knife and craft mat. Save the piece of Stardream gold you cut out for later.
With your EaziScore scoreboard, emboss a wavy line to run through the centre of each border around the aperture on the front of your card.
Cut a piece of Stardream Jupiter card to measure 90mm x 145mm and then glue your piece of Stardream gold card that you have just cut out, on top of the Stardream Jupiter card using double-sided tape or photo glue.
Cut another piece of Stardream Jupiter to measure 70mm x 125mm and glue this on to the top of the Stardream gold card so you now have 3 layers. Then, using photo glue, attach it all on to the inside of the card. Check that it is centred on the inside of the card by aligning it with the aperture to ensure it is in the right place.
Press out and build up the decoupage on to your layered card, using 3D foam pads or silicon glue, so that the decoupage is viewed through the aperture.
With a red permanent marker pen , colour in some of the wavy borders and edge the front of the aperture with them. Then colour 4 corners and add them to each corner of the layered pieces on the inside of the card.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
|
||||||||
 |
||||||||
