 |
||||||||
Card Making Project - Flower Basket Easter Card
Made by Irene
|
||||||||
 |
The golds and purples of this decoupage are reflected by the use of Stardream Amethyst and Stardream Gold paper to create the background on this 8 ins x 8 ins card.
To make this card you will need:
 Reddy Die Cut Decoupage Easter Floral Twin Pack 2A3 Cream Hammer Card cut and creased to 200mm x 200mmStardream Amethyst PaperStardream Gold PaperPeel Offs Fancy Corners and Fine Borders in GoldPeel Offs Happy Easter in GoldFoam Pads 3mm and 1.5mm Thick or Silicon Glue Photo Glue or Double Sided TapeScissorsPencil and Ruler |
|||||||
From the gold paper cut two triangles measuring 180 x 125 x 125mms and 90 mms from apex to base, and also identical triangles from the amethyst paper.
Using either photo glue or double sided tape, and leaving a narrow border at the top, bottom and sides of the card, adhere the triangles to the cream card to form a square, with gold triangles at the sides and amethyst at the top and bottom.
Stick the Gold Fine Borders, from the Fancy Corners and Fine Borders peel off, to the sides of each triangle.
Cut a piece of cream hammer card measuring 140 x 110 mms, add fine borders around the edges and adhere to the centre of the card, using either photo glue or double sided tape.
Using double sided tape, stick the background picture of the decoupage to the centre of the piece of cream card.
Build up the decoupage picture using either 3D foam pads or silicon glue. If using 3D foam pads start with the 3mm thick ones for the bottom layers and 1.5mm ones for the top layers.
Finally add Happy Easter sentiments to the top centre of the card.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
______________________________________________________________________________
|
||||||||
 |
||||||||
