 |
||||||||
Card Making Project - Filigree Delight Card
Made by Jacqui
This card uses the Spellbinders Nestabilities Card Creator Filigree Delight die and some decorative stickers. It is an easy make card although we would recommend using wax paper between the card and the die when cutting such an intricate design.
You need a die cutting machine for this project.
|
||||||||
 |
To make this card you will need:
 White 5 x 7 inch Creased Card Blank A4 Stardream Opal CardA4 Stardream Opal Farfalle CardFlowers and Butterflies Decorative StickersPeel Offs - Just For You - SilverSpellbinders Nestabilities Card Creator A2 Filigree DelightDie Cutting Machine - Cuttlebug, Big Shot or Grand Calibur Photo Glue 3D Foam Tape 2mm ThickCut Rite Wax Paper |
|||||||
Cut a piece of the Stardream Opal card and a piece of the wax paper so that they are slightly larger than the filigree rectangle die and run the die, wax paper and card through the die cutting machine once to cut it and then, changing plates, once again to emboss it.
Cut a piece of the Stardream Opal Farfalle card slightly larger than the oval die in the set and run through the die cutting machine once to cut it and then, changing plates, once again to emboss it.
Using photo glue, place the filigree die cut in the centre of the 5 x 7 inch card blank towards the top of the card leaving a gap of approximately 5mm between the top of the card and the top of the die cut.
Using 3D foam tape place the die cut oval in the centre of the Filigree die cut.
Peel off the 3D decorative stickers flowers from the backing paper and fix in place on the oval. Do the same with the blue butterfly decorative sticker.
Place the Especially for You silver peel off sticker centrally at the bottom of the card.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
______________________________________________________________________________
|
||||||||
 |
||||||||
