 |
||||||||
Falling Leaves Dragonfly Card
Made by Madeleine
Made with an aperture card and a leaf backing card (this one was Dufex but there are a range of leaf design backing papers available). Scissors, a punch or a die can be used to cut the leaves "falling" randomly down the card. Then simply add a dragonfly or butterfly embellishment, topper or die cut to complete the card.
|
||||||||
 |
To make this card you will need:
 A6 Creased Ivory Square Aperture CardLeaves Backing Card plus co-ordinating card or paper for the punched or die cut leaves.Dragonfly embellishment or die cutDouble-sided Adhesive TapeMini and Didi Glue DotsGlue StickLeaf Punch (stromg enough to punch through card) or small leaf die and die cutting machine. |
|||||||
Cut the leaves backing card to 10 mm larger than the aperture then fix it in position behind the aperture using adhesive tape to hold it into place.
Using double-sided tape glue the flap behind the aperture into place.
Punch or die cut 3 leaves from the co-ordinating backing paper.
Apply a strong glue stick to each of the punched leaves and glue them onto the card.
Punch or die cut a dragonfly or butterfly or use a butterfly card topper or embellishment
Attach 2 mini glue dots to the body and a didi glue dot to each of the lower wings onto the card.
********************************
Please feel free to copy this card for your own use. Our angel policy can be accessed via the Gallery home page.
____________________________________________________________________________
|
||||||||
 |
||||||||
